TM 9-2320-209-34-2-3
FRAME 24
1.
Put plate (1) on carriage horns (2).
2.
Put on washers (3) and nuts (4).
3.
Place two wear plates (5) on lower part of carriage horns (2).
4.
Put two capscrews (6) and washers (7) onto each wear plate (5).
5.
Place left-hand bracket (8) on tie rods (9).
6.
Be sure the longest tie rod is placed in upper hole of bracket (8).
GO TO FRAME 25
18-136