TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

TM-9-2320-209-34-2-3 - Page 191 of 592

TM 9-2320-209-34-2-3

f.

Assembly.

FRAME 1

1.

Put a light film of grease on power takeoff lever shaft (1) and cams (2).

2.

With cams (2) in arbor press and aligning marks facing up, place shaft (1) in

cams.

3. Press shaft (1) into cams (2) so that ends of notches on shaft are flush with

hub on cams.

4. Do steps 1, 2 and 3 again for valve lever shaft and cams.

GO TO FRAME 2

18-180