TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

  TM-9-2320-209-34-2-3 - Page 192 of 592

TM 9-2320-209-34-2-3
FRAME 2
1.
Put short end of power takeoff lever shaft (1) into housing (2).
2.
Put long end of cam-actuating lever assembly (3) into housing (2). Be sure
shaft (1), roller (4), and lever (3) are in line.
3.
Note position of keyway (5) when shaft (1), roller (4), and lever (3) are in
line.
Push cam actuating lever (6) all the way down while keeping roller (4)
touching power takeoff lever cam (7).
4.
Keyway (5) should now be 180° from where it was in step 2.
GO TO FRAME 3
18-181


Back to Top