TM-9-2320-209-34-2-3
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3
MAY 1981
TM-9-2320-209-34-2-3 - Page 27 of 592
TM 9-2320-209-34-2-3
FRAME 2
1.
2.
3.
4.
5.
GO
NT E
Readings must be within limits given in table 18-2. If
readings are not within given limits, throw away part
and get a new one.
Check that drum assembly (1) has no chips or cracks. If drum assembly is
damaged, get a new one.
Check that surface of clutch shifter fork (2) where it meets drum sliding
clutch (3) is not broken or damaged. If shifter fork is damaged, get a new
one.
Check that surface clutch (3) where it meets drum assembly is not broken or
damaged.
If clutch is damaged, get a new one.
Check that thrust ring (4) has no cracks. If thrust ring is damaged get a new
one.
Measure inside diameter of drum sliding clutch (3).
TO FRAME 3
Table 18-2. Front Winch (Drum Sliding Clutch) Wear Limits
Size and Fit
Index
of New Parts
Wear Limit
Number
Item/Point of Measurement (inches) (inches)
3
Drum sliding clutch inside diameter 1.8870 to 1.8890 1.9040
18-16
Back to Top
