TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

TM-9-2320-209-34-2-3 - Page 305 of 592

TM 9-2320-209-34-2-3

19-5. RADIATOR BRUSH GUARD REMOVAL, REPAIR, AND REPLACEMENT.

TOOLS:

No special tools required

SUPPLIES:

Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680

PERSONNEL:

One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a. Preliminary Procedures.

(1) Open hood.

Refer to TM 9-2320-209-10.

(2) If truck has stone guard, remove it. Refer to Radiator Stone Shield

Removal and Replacement, TM 9-2320-209-20.

b. Removal.

FRAME 1

1.

Loosen two screws (1) and nuts (2).

2.

Do step 1 again on other side of brush guard (3).

3.

Move brace (4) back out of the way.

4.

Pull brush guard (3) up and off of truck.

END OF TASK

19-12