TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

TM-9-2320-209-34-2-3 - Page 307 of 592

TM 9-2320-209-34-2-3

WARNING

Dry cleaning solvent is flammable. Do not use

near an open flame. Keep a fire extinguisher

nearby when solvent is used. Use only in well-

ventilated places. Failure to do this may result

in injury to personnel and damage to equipment.

d. Cleaning. Clean all parts in solvent.

Steam, wire brush or scraper may be

used to take off heavy grease.

e.

Inspection and Repair.

FRAME 1

NOTE

Trucks with front winches do not have brace (1).

1.

Check that brace (1), brush guard (2) and two headlight guard bars (3) are

not bent, dented or cracked and have no broken welds. Repair damage by

straightening or welding. Refer to TM 9-237.

2.

If parts need more repair, throw them away and get new ones in their place.

END OF TASK

19-14