TM-9-2320-209-34-2-3
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3
MAY 1981
TM-9-2320-209-34-2-3 - Page 309 of 592
TM 9-2320-209-34-2-3
g.
Replacement.
FRAME 1
1.
2.
3.
4.
5.
6.
7.
Put brush guard (1) in place.
Put in screw (2).
Put nut (3) on screw (2) hand tight.
Do steps 2 and 3 again for other side of brush guard (1).
Lower brace (4) onto screw (5) with washer (6) on outside of brace.
Do step 5 again for other side of brush guard (1).
Tighten all screws (2 and 5).
NOTE
Follow-on Maintenance Action Required:
1.
If truck has a stone guard, replace it. Refer to
Radiator Stone Shield Removal and Replacement,
TM 9-2320-209-20.
2. Close hood. Refer to TM 9-2320-209-10.
END OF TASK
19-16
Back to Top
