TM-9-2320-209-34-2-3
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3
MAY 1981
TM-9-2320-209-34-2-3 - Page 454 of 592
TM 9-2320-209-34-2-3
21-13. VAN BODY PERSONNEL HEATER REPAIR.
Refer to Fuel Burning Personnel
Heater Removal, Repair, and Replacement, para 21-9, for procedure to repair van
body personnel heater.
21-14. VAN BODY SECONDARY HEATER REPAIR.
Refer to Fuel Burning Personnel
Heater Removal, Repair, and Replacement, para 21-9, for procedure to repair van
body secondary heater.
21-15. HARD TOP CLOSURE KIT INSTALLATION.
TOOLS :
No special tools required
SUPPLIES : Hard top closure kit, NSN 2540-00-570-1443
PERSONNEL: One
EQUIPMENT CONDITION:
Truck parked, engine off, handbrake set.
Preliminary Procedures. Remove cab top paulin. Refer to B
OW
and Tarp Kits
Installation and Removal, TM 9-2320-209-10.
b.
Installation.
FRAME 1
1.
Take out two buttons (1).
2.
Find and mark center of top of windshield frame (2) .
3.
Mark points (3 and 4) 21 7/8 inches from center of windshield frame (2).
4.
Drill 7/16-inch hole at points ( 3 and 4).
NOTE
No other work on truck is necessary. Installation can be
finished by following replacement procedure for cab hard
top .
Refer to para 21-6.
END OF TASK
21-119
Back to Top
