TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

TM-9-2320-209-34-2-3 - Page 475 of 592

TM 9-2320-209-34-2-3

21-18.

SLAVE RECEPTACLE KIT INSTALLATION. Install kit using instructions that

come with kit.

Section III.

DEEP WATER FORDING KIT

21-19. DEEP WATER FORDING KIT INSTALLATION. Install deep water fording kit

using instructions that come with the kit.

21-20. DEEP WATER FORDING KIT OPERATING TESTS .

TOOLS :

No special tools required

SUPPLIES : Soapy water

PERSONNEL : Two

EQUIPMENT CONDITION :

Truck parked, handbrake set, transmission in neutral

position, fording control handle pulled out, engine off.

Preliminary Procedure. Open hood.

Refer to Engine Equipment Items

Maintenance, TM 9-2320-209-10.

b. Intake Operating Test.

WARNING

If engine is running indoors, make sure that

truck is in a well-ventilated area and exhaust

fumes are vented directly outdoors. Breathing

in of fumes will cause injury to personnel.

1.

Take out flywheel housing drain plug (1) and put it into drain port hole (2).

2.

Start engine. Refer to General Operating Procedures, TM 9-2320-209-10.

GO TO FRAME 2

21-140