TM-9-2320-209-34-2-3
2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3
MAY 1981
TM-9-2320-209-34-2-3 - Page 482 of 592
TM 9-2320-209-34-2-3
21-21. DEEP WATER FORDING KIT REMOVAL, REPAIR, AND REPLACEMENT.
TOOLS:
No special tools required
SUPPLIES:
PERSONNEL:
Cotter pin
Tie down strap (2)
Exhaust extension gasket (2)
Lubricating oil, ICE, OE/HDO 30, MIL-L-2104
Clean rags
Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680
Tw o
EQUIPMENT CONDITION:
Truck parked, engine off, handbrake set.
a.
Preliminary Procedures.
(1) Open hood and left side panel. Refer to TM 9-2320-209-10.
(2) Remove control valve. Refer to TM 9-2320-209-20.
(3) Remove transmission breather. Refer to TM 9-2320-209-20.
21-147
Back to Top
