TM-9-2320-260-10

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 1985

TM-9-2320-260-10 - Page 133 of 411

2-70.18

Change 4

TM 9-2320-260-10

Table 2-2. Preventive Maintenance Checks and Services (Cont’d).

ITEM

NO.

INTERVAL

ITEM TO

CHECK/

SERVICE

CREWMEMBER

PROCEDURE

NOT FULLY

MISSION

CAPABLE IF:

LOCATION

DRIVER

Oil in reservoir

is contaminated.

81

Weekly

Steering

a.

With engine cold, check power

S y s t e m

steering reservoir (1) with dipstick (2)

on filler cap (3). If fluid is below

COLD mark, add as necessary

(LO 9-2320-260-12).

b.

If engine is at normal operating

temperature, 175-200° F (79-93° C),

use HOT F U L L mark and add as

necessary (LO 9-2320-260-12).

WARNING

Accidental or intentional introduction

of liquid contaminants into the environ-

ment is in violation of state, federal,

and military regulations. Refer to

Lubrication Order (para. 3-4) for

information concerning storage, use,

and disposal of these liquids. Failure to

do so may result in injury or death.

CAUTION

• Before opening reservoir, ensure

area around reservoir cap is clean.

Do not allow dirt, dust, or water to

enter reservoir. Failure to do this

will cause damage to internal

components.

• Do not overfill power steering

reservoir. Oil will overflow into

vent system.

NOTE

Power steering reservoir oil level is

checked with engine stopped

( p a r a

. 3-11 )

.

LUBRICANTS

OE/HDO 10

OE/HDO 10

OE/HDO 10

OE/HDO 10

Above 15°F

+40 TO -15°F

+40 TO -65°F

(Above -9°C)

(+4 TO -26°C)

(+4 TO -54°C)

EXPECTED TEMPERATURES