TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 1071 of 1337

TM 9-2320-260-20

I

13-43. HOIST WINCH AUTOBRAKE MAINTENANCE (M816, M819)

THIS TASK COVERS:

a. Removal

c. Installation

b. Adjustment

INITIAL SETUP

APPLICABLE MODELS

M816, M819

MATERIALS/PARTS

Gasket

Six screw-assembled lockwashers

REFERENCES (TM)

TM 9-2320-260-10

TM 9-2320-260-20P

EQUIPMENT CONDITION

Parking brake set (TM 9-2320-260-10).

1. Remove six screw-assembled lockwashers (1), cover (2), and gasket (3) from brake housing case (4).

Discard gasket (3) and screw-assembled lockwashers (1).

2. Clean gasket (3) remains from brake housing case (4).

Adjust screw (5) until gap between housing (4) wall and brake band (6) is 1-3/16 to 1-1/4 in. (30-32 mm).

Install new gasket (3) and cover (2) on brake housing case (4) with six new screw-assembled

lockwashers (1).

13-98