TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 1065 of 1337

TM 9-2320-260-20

I

13-40. WRECKER THROTTLE CONTROL LEVER REPLACEMENT

THIS TASK COVERS:

a .

Removal

b. Installation

INITIAL SETUP

APPLICABLE MODELS

REFERENCES (TM)

M816

TM 9-2320-260-10

MATERIALS/PARTS

TM 9-2320-260-20P

Locknut

EQUIPMENT CONDITION

Cotter pin

Parking brake set (TM 9-2320-260-10).

Two lockwashers

1. Remove

2. Remove

3. Remove

4. Remove

5.

Remove

6. Remove

7. Remove

8. Remove

locknut (7) and washer (8) from stud (10). Discard locknut (7).

cotter pin (5) from retaining pin (6). Discard cotter pin (5).

retaining pin (6) and clevis yoke (9) from lever (4).

lever (4) from stud (10).

stud (10) from selector plate (1).

indicator point (2) from stud (3).

stud (3) from lever (4).

two nuts (14), lockwashers (13), screws (11). and selector plate (1) from mounting

bracket (12). Discard lockwashers (13).

1. Install selector plate (1) on mounting bracket (12) with two screws (11), new lockwashers (13),

and nuts (14).

2. Install stud (3) on lever (4).

3. Install indicator point (2) on stud (3).

4. Install stud (10) on selector plate (1).

5. Position lever (4) on stud (10).

6. Install clevis yoke (9) on lever (4) with retaining pin (6) and new cotter pin (5).

7. Install washer (8) and new locknut (7) on stud (10).

13-92