TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 1139 of 1337

TM 9-2320-260-20

14-12. PERSONNEL HEATER CONTROL CABLES REPLACEMENT

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP

APPLICABLE MODELS

REFERENCES (TM)

All

TM 9-2320-260-10

MATERIALS/PARTS

TM 9-2320-260-20P

Two lockwashers

EQUIPMENT CONDITION

Two locknuts

Parking brake set (TM 9-2320-260-10).

1.

Remove screw (16), clamp (15), nut (4), and control cable (12) from bracket (3) and rod (14) on

diverter (13).

2.

Remove screw (8), clamp (9), nut (5), and control cable (11) from bracket (6) and rod (7) on diverter

adapter (10).

3. Loosen two nuts (2), pull control cables (11) and (12) from bracket (19), and remove two nuts (2)

and lockwashers (17). Discard lockwashers (17).

4. Remove two locknuts (18), screws (1), and bracket (19) from instrument panel (20). Discard

locknuts (18).

1.

Install bracket (19) on instrument panel (20) with two screws (1) and new locknuts (18).

2. Insert control cables (11) and (12) through holes in bracket (19) and install with two new

lockwashers (17) and nuts (2).

3. Install control cable (11) on rod (7) of diverter adapter (10) and bracket (6) with clamp (9), screw (8),

and nut (5).

4. Install control cable (12) on rod (14) of diverter (13) and bracket (3) with clamp (15), screw (16),

and nut (4).

14-22