TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 1183 of 1337

TM 9-2320-260-20

14-33. MACHINE GUN MOUNT KIT MAINTENANCE (Contd)

1.

2.

3.

4.

5.

6.

WARNING

Bracket post must be held in position when installing U-bolts.

Failure to do so may result in injury to personnel.

NOTE

Assistant will help with steps 1 through 10.

Insert two straight pins (3) in right-rear and front bracket posts (4) and (5) and install straight

pins (3) with two new cotter pins (6).

Install four U-bolts (2) on rear gun mount brackets (8) and (9) with eight new locknuts (7). Finger

tighten locknuts (7).

Install right-rear bracket post (4) through U-bolts (2) and gun mount bracket (8) ensuring straight

pin (3) rests on top of U-bolt (2) and right-rear bracket post (4) turns freely.

Install left-rear bracket post (1) through U-bolts (2) and gun mount bracket (9) ensuring welded

post pin (10) rests on top of U-bolt (2) and left-rear bracket post (1) turns freely.

Loosen four screws (11) on right-front gun mount bracket (12).

Install right-front bracket post (5) in front gun mount bracket (12) ensuring straight pin (3) rests

on top of gun mount bracket (12).

14-66