TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 1185 of 1337

TM 9-2320-260-20

I

14-34. DECONTAMINATION MOUNTING KIT REPLACEMENT

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP

APPLICABLE MODELS

EQUIPMENT CONDITION

All

• Parking brake set (TM 9-2320-260-10).

MATERIALS/PARTS

•

Decontamination apparatus removed

(TM 3-4230-204-12&P).

Eight locknuts

REFERENCES (TM)

TM 9-2320-260-10

TM 9-2320-260-20P

TM 3-4230-204-12&P

1. Remove five locknuts (9), screws (6), ten washers (7), support bracket (2), and brace (5) from

fender (10). Discard locknuts (9).

2. Remove locknut (4), washer (3), and brace (5) from support bracket (2) and stud (14). Discard

locknut (4).

3. Remove two straps (1) from bracket (13) and support bracket (2).

4. Remove two locknuts (8), screws (11), washers (12), and bracket (13) from support bracket (2).

Discard locknuts (8).

1. Install bracket (13) on support bracket (2) with two washers (12), screws (11), and new locknuts (8).

2. Install two straps (1) on bracket (13) and support bracket (2).

3. Install brace (5) on support bracket (2) and stud (14) with washer (3) and new locknut (4). Finger

tighten locknut (4).

4. Position support bracket (2) and brace (5) on fender (10) and install with five screws (6), ten

washers (7), and five new locknuts (9).

5. Tighten locknut (4).

14-68