TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 619 of 1337

TM 9-2320-260-20

I

7-19. SHOCK ABSORBER REPLACEMENT

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP

APPLICABLE MODELS

REFERENCES (TM)

All

TM 9-2320-260-10

MATERIALS/PARTS

Four locknuts

TM 9-2320-260-20P

EQUIPMENT CONDITION

Four bushings

●

Parking brake set (TM 9-2320-260-10).

●

Front wheel removed (para. 9-3).

1. Remove locknut (9), washer (8), and bushing (7) from each mounting pin (4). Discard locknuts (9)

and bushings (7).

2. Remove shock absorber (10) from two mounting pins (4).

3. Remove bushing (6) and washer (5) from each mounting pin (4). Discard bushings (6).

4. Remove locknut (12), screw (13), and mounting pin (4) from lower spring seat (11). Discard

locknut (12).

5. Remove locknut (1), screw (2), and mounting pin (4) from bracket (3). Discard locknut (1).

1. Install mounting pin (4) on lower spring seat (11) with screw (13) and new locknut (12).

2. Install mounting pin (4) on bracket (3) with screw (2) and new locknut (1).

3. Install washer (5) and new bushing (6) on each mounting pin (4).

4. Install shock absorber (10) on two mounting pins (4).

5. Install new bushing (7), washer (8), and new locknut (9) on each mounting pin (4). Tighten

locknuts (9) 70-85 lb-ft (95-115 N•m).

7-44