TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 881 of 1337

TM 9-2320-260-20

I

12-24. REAR DOOR LOCK REPLACEMENT

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP

APPLICABLE MODELS

REFERENCES (TM)

M820, M820A1, M820A2

TM 9-2320-260-10

MATERIALS/PARTS

TM 9-2320-260-20P

Two cotter pins

EQUIPMENT CONDITION

Parking brake set (TM 9-2320-260-10).

1. Remove pin (11) and handle (10) from lock (14).

2. Remove two cotter pins (9), rods (8), and washers (12) from lock (14). Discard cotter pins (9).

3. Remove six screws (4) and two covers (3) from door (1).

4. Remove two screws (6), washers (7), and latches (5) from two rods (8).

5. Remove four screws (15) and five shims (2) from door (1).

6. Remove four screws (13) and lock (14) from door (1).

1. Install lock (14) on door (1) with four screws (13).

2. Install five shims (2) on door (1) with four screws (15).

3. Install two latches (5) on rods (8) with two washers (7) and screws (6).

4. Install two covers (3) on door (1) with six screws (4).

5. Position latch (5) on upper rod (8) in cover (3), and install washer (12), rod (8), and new cotter

pin (9) on lock (14).

6. Position latch (5) on lower rod (8) in cover (3), and install washer (12), rod (8), and new cotter

pin (9) on lock (14).

7. Install handle (10) on lock (14) with pin (11).

12-44