TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 889 of 1337

TM 9-2320-260-20

12-26. SIDE PANEL LOCK REPLACEMENT

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP

APPLICABLE MODELS

EQUIPMENT CONDITION

M820, M820A1, M820A2

•

Parking brake set (TM 9-2320-260-10).

MATERIALS/PARTS

●

Van body side panels expanded (TM 9-2320-260-

10).

Four lockwashers

• Side door opened (rear locks only)

Two cotter pins

(TM 9-2320-260-10).

REFERENCES (TM)

TM 9-2320-260-10

TM 9-2320-260-20P

1.

Remove eight screws (7) and plate (9) from side panel wall (17).

2. Remove cotter pins (1) and (19), clevis pins (6) and (10), and clevises (2) and (5) from two lock

arms (11) and bars (3) and (8). Discard cotter pins (1) and (19).

3. Remove nut (13) and washer (12) from handle shank (20).

4. Remove four nuts (14), lockwashers (15), and lock (16) from wall panel (4). Discard lockwashers (15).

5. Remove two screws (21) and retainer (18) from side panel wall (17).

1.

Install retainer (18) on side panel wall (17) with two screws (21).

2.

Install lock (16) on wall panel (4) with four new lockwashers (15) and nuts (14).

3. Install washer (12) and nut (13) on handle shank (20).

4. Install clevises (2) and (5) on two lock arms (11) and bars (3) and (8) with clevis pins (6) and (10) and

new cotter pins (1) and (19).

5. Install plate (9) on side wall panel (17) with eight screws (7).

12-52