TM-9-2320-260-20
TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)
TECHNICAL MANUAL; UNIT MAINTENANCE
APRIL 1995
TM-9-2320-260-20 - Page 883 of 1337
TM 9-2320-260-20
I
12-25. PANEL SEALS REPLACEMENT
THIS TASK COVERS:
a. Roof Panel Seals Removal
e. Side Panel Seals Installation
b. Floor Panel Seals Removal
f. Wall Panel Seals Installation
c. Wall Panel Seals Removal
g. Floor Panel Seak Installation
d. Side Panel Seals Removal
h. Roof Panel Seals Installation
INITIAL SETUP
APPLICABLE MODELS
M820, M820A1, M820A2
MATERIAIS/PARTS
Two hundred six rivets
Twenty-six seals
Four seal blocks
Adhesive (Appendix C, Item 2)
REFERENCES fTM)
TM 9-2320-260-10
TM 9-2320-260-20P
EQUIPMENT CONDITION
●
Parking brake set (TM 9-2320-260-10).
• Van body side panels expanded
(TM 9-2320-260-10).
●
Roof and floor panels open (TM 9-2320-260-10).
NOTE
• The right and left roof, floor, side, and wall panel seals are
replaced basically the same way.
●
Remove seal remains and adhesive from all panels.
1. Remove twenty-four rivets (9), two retainers (8), and seals (10) from roof panel (1). Discard rivets (9)
and seals (10).
2. Remove seal (4) from roof panel (1). Discard seal (4).
3. Remove fifty-two rivets (7), retainer (6), and seal (5) from roof panel (1). Discard rivets (7) and
seal (5).
4. Remove two seal blocks (2) and seals (3) from roof panel (1). Discard seals (3) and seal blocks (2).
1. Remove thirty screws (15), two retainers (14), four seals ( 13), and two channels (12) from floor
panel (11). Discard seals (13).
2. Remove forty-one rivets (17) and seal (16) from floor panel (11). Discard rivets (17) and seal (16).
12-46
Back to Top
