TM-9-2320-260-20
TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)
TECHNICAL MANUAL; UNIT MAINTENANCE
APRIL 1995
TM-9-2320-260-20 - Page 969 of 1337
TM 9-2320-260-20
12-72. TRACTOR TOOLBOX REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP
APPLICABLE MODELS
REFERENCES (TM)
M818
TM 9-2320-260-10
MATERIALS/PARTS
TM 9-2320-260-20P
Ten locknuts
EQUIPMENT CONDITION
PERSONNEL REQUIRED
• Parking brake set (TM 9-2320-260-10).
Two
• Spare tire removed (TM 9-2320-260-10).
1.
Remove two locknuts (11), screws (1), and brace (2) from toolbox (10) and support bracket (4).
Discard locknuts (11).
2. Remove two locknuts (12) and screws (3) from angle brackets (5) and toolbox (10). Discard locknuts
(12).
3. Remove six locknuts (7), screws (9), washers (8), and toolbox (10) from mounting bracket (6). Discard
locknuts (7).
1.
Install toolbox (10) on mounting bracket (6) with six screws (9), washers (8), and new locknuts (7).
2.
Install two angle brackets (5) on toolbox (10) with four screws (3) and new locknuts (12).
3.
Install brace (2) on toolbox (10) and support bracket (4) with two screws (1) and new locknuts (11).
FOLLOW-ON TASK: Install spare tire (TM 9-2320-260-10).
12-132
Back to Top
