TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 970 of 1337

TM 9-2320-260-20

12-73. SPLASH GUARD REPLACEMENT

THIS TASK COVERS:

a. Removal b. Installation

INITIAL SETUP

APPLICABLE MODELS

REFERENCES (TM)

M818

TM 9-2320-260-10

MATERIAIS/PARTS

TM 9-2320-260-20P

Fifteen locknuts

EQUIPMENT CONDITION

Parking brake set (TM 9-2320-260-10).

1. Remove three locknuts (14), washers (13), and screws (10) from support plate (11) and fuel tank

hanger (15). Discard locknuts (14).

2. Remove three locknuts (7) washers (8), screws (12), and support plate (11) from splash guard (4).

Discard locknuts (7).

9. Remove six locknuts (6), washers (5), screws (3), and splash guard (4) from bracket (9). Discard

locknuts (6).

4. Remove three locknuts (1), screws (2), and bracket (9) from frame (16). Discard locknuts (1).

1. Install bracket (9) on frame (16) with three screws (2) and new locknuts (1).

2. Install splash guard (4) on bracket (9) with six screws (3), washers (5), and new locknuts (6).

3. Install support plate (11) on splash guard (4) with three screws (12), washers (8), and new

4.

locknuts (7).

Install support plate (11) on fuel tank hanger (15) with three screws (10), washers (13), and new

locknuts (14).

12-133