TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 989 of 1337

13-16

TM 9-2320-260-20

13-7. FRONT WINCH FRAME EXTENSION REPLACEMENT

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP

APPLICABLE MODELS

EQUIPMENT CONDITION

M813A1 W/W, M818 W/W, M819 W/W

• Parking brake set (TM 9-2320-260-10).

MATERIALS/PARTS

• Front winch removed (para. 13-8).

• Vehicle tiedown loop removed (para. 10-2).

Eight locknuts

Three lockwashers

REFERENCES (TM)

TM 9-2320-260-10

TM 9-2320-260-20P

1. Remove three screws (10), lockwashers (9), washers (8), and angle bracket (7) from channel

reinforcement (4). Discard lockwashers (9).

2. Remove four locknuts (6), screws (1), and rail extension (11) from channel reinforcement (4).

Discard locknuts (6).

3. Remove four locknuts (5), screws (2), and channel reinforcement (4) from rail (3). Discard

locknuts (5).

1. Install channel reinforcement (4) on rail (3) with four screws (2) and new locknuts (5).

2. Install rail extension (11) on channel reinforcement (4) with four screws (1) and new locknuts (6).

3. Install angle bracket (7) on channel reinforcement (4) with three washers (8), new lockwashers (9),

and screws (10).