TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 983 of 1337

TM 9-2320-260-20

13-5. WINCH CABLE, CHAIN, AND HOOK MAINTENANCE

THIS TASK COVERS:

a. Removal

c. Installation

b. Cleaning and Inspection

INITIAL SETUP

APPLICABLE MODELS

EQUIPMENT CONDITION

All W/W

•

Parking brake set (TM 9-2320-260-10).

MATERIALS/PARTS

• Winch prepared for use (TM 9-2320-260-10).

Lubricating oil (Appendix C, Item 19)

GENERAL SAFETY INSTRUCTIONS

Rags (Appendix C, Item 22)

• Wear hand protection when handling winch cable.

REFERENCES (TM)

• Eye protection is required when using a wire

brush for cleaning.

LO 9-2320-260-12

TM 9-2320-260-10

TM 9-2320-260-20P

WARNING

Wear hand protection when handling winch

may cause injury to personnel.

1.

Unwind cable (4) from winch (2) (TM 9-2320-260-10).

2. Remove setscrew (1) and cable (4) from winch drum (3).

NOTE

cable. Broken wires

Two types of cable connectors maybe found on M809 series

winches.

3. Hollow clevis type:

a. Remove nut (7), screw (5), and chain (8) from clevis yoke (6).

b. Remove cap (10), cable (4), and plug (9) from clevis yoke (6).

c. Remove plug (9) and cap (10) from cable (4).

4. Half clamp type:

a. Remove clamp nut (13), loop (12), and half clamps (14) and (15) from cable (4).

b. Remove hook (11) from loop (12).

13-10