TM-9-2320-260-34-1

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 1 OF 2

JULY 1994

TM-9-2320-260-34-1 - Page 306 of 657

TM 9-2320-260-34-1

3-84. TOP STOP INJECTOR PLUNGER TRAVEL ADJUSTMENT (Contd)

14. Push "i/m” (inch/millimeter) selector button (2) on digimatic indicator (1) until “in” is displayed.

NOTE

l To use U.S. customary values, the display on the digimatic

indicator must display

and ‘in”.

l To use metric values, the display on the digimatic indicator must

display “$” and “mm”.

15. Push direction selector button (3) on digimatic indicator (1) until”~ is displayed.

16. Press PSET button (4) sand enter the top stop setting fixture preset value using numbered key (6) on

digimatic presetter (5). Ensure a “P’ is indicated on digimatic indicator.

NOTE

Preset values must be indicated on digimatic indicator before pre-

ceding with plunger travel setting or an incorrect reading will be

taken for the plunger travel.

17. Press LOAD button (7) and wait 5 seconds or until the digimatic indicator (1) displays preset .

readings.

3-254