TM-9-2320-260-34-1

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 1 OF 2

JULY 1994

TM-9-2320-260-34-1 - Page 351 of 657

TM 9-2320-260-34-1

5-11. FLOW TEST (Contd)

1. Remove plunger (9) from injector (8).

2. Install spring (10) and plunger (9) in injector (8).

3. Install retainer plate (13) on burnishing tool adapter (5) with two pins (11).

NOTE

Use test stand link 6.5 in. (17 cm) long.

4. Place test stand link (12) in burnishing tool adapter (5).

5. Position injector (8) in injector seat (14) on test stand (15).

5-31