TM-9-2320-260-34-1

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 1 OF 2

JULY 1994

TM-9-2320-260-34-1 - Page 356 of 657

TM9-2320-260-34-1

5-11. FLOW TEST (Contd)

32. Remove test stand link (2) from burnishing tool adapter (5).

33. Remove two pins (1), retainer plate (3), and burnishing tool adapter (5 )from tests stand (6).

34. Remove locking screw (4 )and injector (9) from adapter( 5).

35. Install new screen (8) on injector (9) with new retainer ring (7).

NOTE

Perform step 36 for non-top stop injector.

36. Install spring (11) and plunger (10) in injector (9).

NOTE

Perform steps 37 and 38 for top stop injector.

37. Install plunger spring (11), spring retainer (14), and plunger (10) on injector (3).

38. Using adjusting wrench and locknut wrench, install adjusting screw (13) and locknut (12) on

injector (9).

FOLLOW-ON TASK: Install injector (para. 5-6).

5-36