TM-9-2320-260-34-1

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 1 OF 2

JULY 1994

TM-9-2320-260-34-1 - Page 489 of 657

TM 9-2320-260-34-1

8-6. TRANSMISSION MAINTENANCE (Contd)

39.

40.

41.

42.

43.

44.

45.

46.

Install nut (16) on countershaft (14). Tighten nut (16) 550-600 lb-ft (746-814 N.m).

Install new cotter pin (18) through nut ( 16) and countershaft (14).

Position spacer washer (15) on output shaft (13).

NOTE

Apply sealing compound to gaskets before installation.

Install new gasket (17) and countershaft rear cover (19) on transmission case (3) with four new

lockwashers (20) and screws (21).

Install new seal (22) on output shaft cover (11).

Install new gasket (12) and output shaft cover (11) on transmission case (3) with four new lock-

washers (10) and screws (9).

Install shield (8) and companion flange (7) on output shaft (13) with nut (6). Tighten nut (6)

500-550 lb-ft (678-746 N.m).

Install new cotter pin (23) through nut (6) and output shaft (13).

8-33