TM-9-2320-260-34-2

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 2 OF 2

JULY 1994

TM-9-2320-260-34-2 - Page 448 of 863

TM 9-2320-260-34-2

16-8. REAR WINCH REPAIR (Contd)

7. Using arbor press, remove bushing (13) from cover (12). Discard bushing (13).

8. Using arbor press, install new bushing (13) in cover (12).

9.

Inspect end frame (8) for cracks, breaks, damaged or missing pin (15), damaged threads, and scoring

on seal surface (14). Repair or replace end frame (8) if worn or damaged. Replace pin (15)

if missing or damaged.

Table16-6. Rear Winch Parts Wear Limits.

WEAR LIMITS/TOLERANCES

No.

ITEM/POINT OF MEASUREMENT

INCHES

MILLIMETERS

2

Gearcase

9

Bushing - inner diameter - maximum

3.006

76.33

10

Bearing bores - inner diameter - maximum

5.1191

130.025

11

Shaft (3 places) - outer diameter-minimum

2.998

76.15

12

Cover

13

Bushing - inner diameter - maximum

3.251

82.58

16-49