TM-9-2320-260-34-2

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 2 OF 2

JULY 1994

TM-9-2320-260-34-2 - Page 459 of 863

16-9. REAR WINCH LEVEL WIND MAINTENANCE (Contd)

6. Remove grease fitting (15) and locknut (14) from pivot shaft (2). Discard locknut (14).

7. Remove pivot frame (1) and pivot shaft (2) from trolley frame (16).

8. Remove upper race (3), forty-five ball bearings (18), and lower race

(4)

from trolley frame (16).

NOTE

Wheel sets of both axles are disassembled the same. Left axle

wheel set is shown.

9. Remove two grease fittings (8) from ends of axle (17).

10. Remove two snaprings (7), washers (6), outer felt washers (5), wheels (9), inner felt washers (11),

and thrust washers (12)

from

axle (17). Discard felt washers (5) and (11).

11. Using arbor press, remove two bearings (10) from wheels (9).

12. Remove two grease fittings (13) from trolley frame (16).

16-60

TM 9-2320-260-34-2