TM-9-2320-260-34-2

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 2 OF 2

JULY 1994

TM-9-2320-260-34-2 - Page 460 of 863

16-9. REAR WINCH LEVEL WIND MAINTENANCE (Contd)

14.

15.

16.

17.

18.

Remove four screws (26), lockwashers (25), and cable guard (24) from pivot frame (11). Discard

lockwashers (25).

Remove two snaprings (28), shaft (29), two thrust washers (19), and sheave (21) from pivot

frame (1).

Remove pin (27) from shaft (29).

Remove two spacers (20), bearing (22), race (23), and grease fitting (35) from sheave (21).

Remove locknut (34), washer (33), felt washer (32), and felt seal (30) from end of pivot shaft (2).

Discard locknut (34), felt washer (32) and felt seal (30).

Using arbor press, remove pivot shaft (2) and bearing (31) from pivot frame (1).

16-61

TM 9-2320-260-34-2