TM-9-2320-260-34-2

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 2 OF 2

JULY 1994

TM-9-2320-260-34-2 - Page 535 of 863

TM 9-2320-260-34-2

16-22. CRANE GONDOLA MAINTENANCE (M816) (Contd)

1.

2.

3.

4.

5.

6.

7.

8.

Attach chain to lifting device and gondola body (2).

WARNING

●

All personnel must stand clear during lifting operations.

A swinging or shifting load may cause injury to personnel.

●

Ensure lifting capacity is greater than weight (500 lb (227 kg))

of crane gondola. Failure to do so may result in injury to per-

sonnel or damage to equipment.

NOTE

Assistant will help with steps 2 and 3.

Position gondola body (2) near boom support (1) and route two hoses (11) through bracket (16) and

into gondola body (2).

Install gondola body (2) on boom support (1) using twelve new lockwashers (5) and screws (4).

Tighten screws (4) 44-61 lb-ft (60-83 N•m).

Remove chain from lifting device and gondola body (2).

Route four hoses (15) through bracket (16) and into gondola body (2).

Install hoses (11) and (15) on brackets (14) and (16) with three clamps (9) and (13) and new

locknuts (10) and (12).

Install tube (8) and hose (7) on crossover tee ( 17).

Install gondola guard (6) on gondola body (2).

16-136