TM-9-2320-260-34-2

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 2 OF 2

JULY 1994

TM-9-2320-260-34-2 - Page 546 of 863

TM 9-2320-260-34-2

16-25. HOIST BEVEL GEARCASE REPAIR (M816) (Contd)

7.

8.

9.

10.

11.

12.

13.

14.

Remove screw (23), lockwasher (22), and washer (21) from driveshaft (14). Discard lockwashers (22).

NOTE

Tag gear and shaft for installation.

Using puller, remove bevel gear (20) and woodruff key (19) from driveshaft (14). Discard woodruff

key (19).

Remove snapring (24) from housing (13).

Using arbor press, press driveshaft (14) toward gearcase end of housing (13) until bearing (18) clears

housing (13).

Using puller, remove bearing (18) from driveshaft (14).

Using arbor press, turn housing (13) over, and press driveshaft (14) and bearing (17) out of pump

end of housing (13).

Using arbor press or mechanical puller, remove bearing (17) from drive shaft (14).

Remove screw (25), lockwasher (26), washer (27), yoke (28), and spacer (29) from input shaft (30).

Discard lockwasher (26).

16-147