TM-9-2320-260-34-2

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 2 OF 2

JULY 1994

TM-9-2320-260-34-2 - Page 684 of 863

TM 9-2320-260-34-2

16-48. POWER DIVIDER REPAIR (Contd)

b. Cleaning and Inspection

1.

For general cleaning instructions, refer to para. 2-8.

2. For general inspection instructions, refer to para. 2-9.

3. Inspect double shifter housing (5), single shifter housing (16), and housing (20) for cracks, breaks,

and wear. Refer to table 16-21, Power Divider and Shifter Housings Wear Limits, for measurements.

Replace housings (5), (16), or (20) if damaged or worn past limits.

Table 16-21. Power Divider and Shifter Housings Wear Limits.

ITEM

WEAR LIMITS/TOLERANCES

NO.

lTEM/POINT OF MEASUREMENT

INCHES

MILLIMETERS

5

Double shifter housing

A Shifter shaft bores (4) - maximum

1.501

38.125

16

Single shifter housing

B. Shifter shaft bores - maximum

1.501

38.125

20

Housing

C. Input shaft bores - maximum

3.1503

80.018

D. Winch shaft bores – maximum

3.1503

80.018

E. Pump shaft front bore – maximum

2.8353

72.017

F. Pump shaft rear bore - maximum

3.1503

80.018

16-285