TM-9-2320-260-34-2

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 2 OF 2

JULY 1994

TM-9-2320-260-34-2 - Page 676 of 863

TM 9-2320-260-34-2

16-47. POWER DIVIDER AND DRIVE REPLACEMENT (Contd)

16.

17.

18.

19.

Install

clevis

(21) on control lever (26) with two washers (20), straight pin (25), and new cotter

pin (19).

Install control link (22) on air valve (27) with two washers (23) and two new cotter pins (24).

Install control link (32) on control lever (34) with straight pin (33) and new cotter pin (35).

Install control link (31) on control lever (30) with straight pin (29) and new cotter pin (28).

FOLLOW-ON TASKS:

Install power divider-to-hydraulic pump propeller shaft (TM 9-2320-260-20).

Install power divider-to-rear winch drive propeller shaft (TM 9-2320-260-20).

Install transfer-to-power divider propeller shaft (TM 9-2320-260-20).

Fill power divider and drive with oil to proper level (LO 9-2320-260-12).

Start engine (TM 9-2320-260-10), Check for leaks and proper operation.

16-277