TM-9-2320-260-34-2
TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 2 OF 2
JULY 1994
TM-9-2320-260-34-2 - Page 813 of 863
TM 9-2320-260-34-2
APPENDIX E (Contd)
ITEM
MATERIALS
NO.
REQ’D
DESCRIPTION
NSN
4
1
Bolt: MS90728-171
5
1
Bolt Guide: 6-5/32 x 1-1/2 x 1-1/2, MS14296H405
2
2
Bolt Guide Support:
5-15/16 X 1-3/4 x 3/8, MS14296H389
1
1
Cover, Rear Output Shaft: 8758288
6
1
Gage Support: 1-1/2 x 1-1/8 x 3/16, MS14296H405
8
1
Flange Nut, Slotted Head: MS35692-1
9
1
Mounting Plate: 2-1/16 x 1-5/8 x 3/8, MS14296H369
3
2
Nut: MS51922-49
7
6
Screw, Cap, Socket Head: MS16997-70
PROCEDURE
1. Assemble rear output shaft adjusting fixture using materials and diagram above.
2. Attach two bolt guide supports (2) to cover (1) with six socket head capscrews (7).
3. Thread upper nut (3) onto bolt (4). Thread bolt (4) into bolt guide (5) and gage support (6).
Thread lower nut (3), mounting plate (9), and flange nut (8) on bolt (4).
Figure E-3 (Contd). Rear Output Shaft Adjusting Fixture.
E-4
Back to Top
