TM-9-2320-260-34-2
TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 2 OF 2
JULY 1994
TM-9-2320-260-34-2 - Page 815 of 863
TM 9-2320-260-34-2
APPENDIX E (Contd)
ITEM
MATERIALS
NO.
REQ’D
DESCRIPTION
NSN
3
1
Bolt: MS16922-610
4
1
Bolt: MS16992-609
6
1
Bolt Guide: 5-7/16 x 1-1/2 x 1-1/4, MS14296H389
8
2
Bolt Guide Support:
3/8 x 1-1/2 x 1-1/4, MS14296H403
2
2
Cover, Rear Bearing 7346759
7
1
Gage Support: 1-1/2 x 1-1/8 x 3/16, MS14296H369
5
4
Nut: MS51922-53
1
6
Screw, Cap, Socket Head: MS16997-70
1. Assemble intermediate shaft adjusting fixture using materials and diagram above.
2. Thread upper nut (5) onto bolt (3). Thread bolt (3) into bolt guide (6) and gage support (7).
Thread lower nut (5) onto bolt (3).
3. Thread upper nut (5) onto bolt (4). Thread bolt (4) into bolt guide (6). Thread lower nut (5) onto
bolt (4).
4. Attach two bolt guide supports (8) to cover (2) with six socket head capscrews (1).
Figure E-4 (Contd). Intermediate Shaft Adjusting Fixture.
PROCEDURE:
E-6
Back to Top
