TM-9-2320-260-34-2
TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 2 OF 2
JULY 1994
TM-9-2320-260-34-2 - Page 814 of 863
TM 9-2320-260-34-2
APPENDIX E (Contd)
ITEM
MATERIALS
NO.
REQ’D
DESCRIPTION
NSN
2
1
Bolt: MS16992-610
3
1
Bolt MS16992-609
4
1
Bolt Guide: 5-7/16 x 1-1/2 x 1-1/4, MS14296H389
6
2
Bolt Guide Support:
3/8 x 1-1/2 x 1-1/4, MS14296H403
1
Cover, Rear Bearing 7346759
5
1
Gage Support: 1-1/2 x 1-1/8 x 3/16, MS14296H369
NOTES
1.
The tolerance on all two place decimal dimensions is ±0.03 in. (0.76 mm). The tolerance on all
three place decimal dimensions is ±0.005 in. (0.127 mm).
2. Refer tp TM 9-237, Operator’s Manual: Welding Theory and Application, for welding
instructions.
PROCEDURE
1. Fabricate intermediate shaft adjusting fixture using materials and instructions above.
2. Assemble using instructions on next page.
Figure E-4. Intermediate Shaft Adjusting Fixture.
E-5
Back to Top
