TM-9-2320-260-34-2
TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 2 OF 2
JULY 1994
TM-9-2320-260-34-2 - Page 85 of 863
TM 9-2320-260-34-2
Section
IV. DUMP BODY MAINTENANCE
15-11. DUMP BODY MAINTENANCE INDEX
PARA.
TITLE
PAGE
NO.
NO.
15-12.
15-13.
15-14.
15-15.
15-16.
15-17.
15-18.
15-19.
15-20.
15-21.
Cab Protector Shield Maintenance
Dump Body Maintenance
Roller Arm Maintenance
Hoist Cylinder Maintenance
Hoist Safety Latch Maintenance
Hoist Pump Maintenance
Subframe Replacement
Control Valve Maintenance
Hydraulic Hoses Replacement
Safety Brace Replacement
15-24
15-28
15-35
15-38
15-48
15-52
15-56
15-60
15-64
15-69
15-12. CAB PROTECTOR SHIELD MAINTENANCE
I
THIS
TASK COVERS:
a.
Removal
c.
Installation
b. Cleaning and Inspection
INITIAL SETUP
APPLICABLE MODELS
M817
TOOLS
General mechanic’s tool kit
(Appendix B, Item 1)
Lifting device
Two screws (Appendix C, Item 34)
Two nuts (Appendix C, Item 25)
Four washers (Appendix C, Item 57)
Chain
Supports
MATERIALS/PARTS
Twelve locknuts (Appendix D, Item 169)
Four cotter pins (Appendix D, Item 20)
REFERENCES (TM)
TM 9-237
TM 9-2320-260-10
TM 9-2320-260-34P-2
EQUIPMENT CONDITION
Parking brake set (TM 9-2320-260-10).
GENERAL SAFETY INSTRUCTIONS
●
All personnel must stand clear during lifting
operations.
●
Ensure lifting capacity is greater than weight of
protector shield.
1.
Attach chain to cab protector shield (1) with two screws (2), four washers (3), and two nuts (4).
2.
Attach lifting device to chain.
3. Remove eight locknuts (14), screws (16), and washers (15) from cab protector shield (1) and dump
body (11). Discard locknuts (14).
4.
Remove four cotter pins (10), nuts (9), washers (8), washers (6), and screws (5) from cab protector
shield (1) and dump body (11). Discard cotter pins (10).
15-24
Back to Top
