TM-9-2320-260-34-2
TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 2 OF 2
JULY 1994
TM-9-2320-260-34-2 - Page 86 of 863
TM
9-2320-260-34-2
15-12.
CAB PROTECTOR SHIELD MAINTENANCE (Contd)
5. Remove four locknuts (7), screws (13), and washers (12) from cab protector shield (1) and dump
body (11). Discard locknuts (7).
WARNING
●
All personnel must stand clear during lifting operations.
A shifting or swinging load may cause injury to personnel.
Ž Ensure lifting capacity is greater than weight (465
lb
(211 kg))
of cab
protector shield,
Failure to do so may result i n injury to
personnel or damage to equipment,
NOTE
Assistant will help with step 6.
6. Raise cab protector shield (1) away from dump body (11) and lower onto supports,
7. Remove lifting device from chain,
8. Remove two nuts (4), screws (2), four washers (3), and chain from
cab protector shield (1).
15-25
Back to Top
