TM-9-2320-272-10

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; OPERATOR'S MANUAL

SEPTEMBER 2004

CHANGE 2

TM-9-2320-272-10 - Page 305 of 481

TM 9-2320-272-10

2-196

2-29. PREPARATION FOR SHIPMENT (Contd)

d.

Mirror Removal and Installation.

(1)

Removal

(a)

On left side of vehicle, remove locknut (11) and washer (10) from

screw (8), lower brace (5), and lower door hinge (9).

(b)

Remove locknut (13) and washer (14) from screw (18) support

braces (16) and (17), and bracket (15).

(c)

Remove locknut (12) and washer (7) from screw (2), support braces

(1) and (3), and door hinge (6).

(d)

Remove screws (2), (8), and (18) from mirror assembly (4), bracket

(15), and door hinges (6) and (9). Remove mirror assembly (4).

(e)

Install screw (18), washer (14), and locknut (13) on support bracket (15).

(f)

Install screw (2), washer (7), and locknut (12) on door hinge (6).

(g)

Install screw (8), washer (10), and locknut (11) on door hinge (9).

(h)

Repeat steps a through g for right side of vehicle.

(2)

Installation

(a)

On left side of vehicle, remove screw (2), washer (7), and locknut

(12) from door hinge (6).

(b)

Remove screw (18), washer (14),

and locknut (13) from support bracket (15).

(c)

Remove screw (8), washer (10),

and locknut (11) from door hinge (9).

(d)

Install mirror assembly (4) on

top door hinge (6) with screw (2), washer

(7), and locknut (12), and on lower door

hinge (9) with screw (8), washer (10), and

locknut (11).

(e)

Install support braces

(16) and (17) on bracket (15) with screw

(18), washer (14), and locknut (13).

(f)

Adjust mirror as neces-

sary to provide unobstructed rear view.

(g)

Repeat steps a through f

for right side of vehicle.