TM 9-2320-272-10
2-197
2-29. PREPARATION FOR SHIPMENT (Contd)
e.
Exhaust Pipe Extension Removal and Installation.
WARNING
Do not touch hot exhaust system components with bare hands.
Injury to personnel may result.
(1)
Removal
(a)
Remove locknut (25) and screw (22) from muffler coupling clamp (21).
(b)
Remove muffler coupling clamp (21), gasket (24), and muffler exten-
sion (20) from muffler (23).
(c)
Install screw (22), locknut (25), muffler coupling clamp (21), and
gasket (24) on muffler extension (20).
(2)
Installation
(a)
Remove locknut (25) and screw (22) from muffler coupling clamp (21).
(b)
Remove muffler coupling clamp (21) and gasket (24) from muffler
extension (20).
(c)
Install muffler extension (20) and gasket (24) to muffler (23) with
screw (22), muffler coupling clamp (21), and locknut (25).
(d)
Rotate muffler exhaust extension (20) so that top points away from
cab (19). Tighten screw (22) and locknut (25) to seal muffler extension (20) to muffler
(23).
(e)
Start engine (para. 2-12) and check for exhaust leaks.
NOTE
Report removal and installation to unit maintenance to replace