TM-9-2320-272-23-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-2 - Page 811 of 1417
INSTALLATION
NOTE
Locknuts are installed under cab floor.
1.
Align indicator plate (Figure 2, Item 4) and mounting bracket (Figure 2, Item 10) with holes in cab floor
(Figure
2, Item 5) and install with two washers (Figure 2, Item 14), screws (Figure 2, Item 15), and locknuts
(Figure 2, Item 13).
NOTE
Male pipe threads must be wrapped with antiseize tape before installation.
2.
Install two elbows (Figure 2, Item 8), pipe nipples (Figure 2, Item 6), and elbows (Figure 2, Item 7) on selector
valve (Figure 2, Item 9).
3.
Install selector valve (Figure 2, Item 9) on mounting bracket (Figure 2, Item 10) with two lockwashers
(Figure
2,
Item
11) and screws (Figure 2, Item 12).
4.
Install lever (Figure 2, Item 3) on selector valve (Figure 2, Item 9) with lockwasher (Figure 2, Item 2) and screw
(Figure 2, Item 1). Ensure lever (Figure 2, Item 3) pointer is positioned opposite notch on stem of selector valve
(Figure 2, Item 9).
TM 9-2320-272-23-2
0255
0255-4
Back to Top
