TM-9-2320-272-23-3

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5

SEPTEMBER 2012

TM-9-2320-272-23-3 - Page 1099 of 1469

INSTALLATION

1.

Install bracket (Figure 2, Item 3) on wheel valve (Figure 2, Item 20) with two washers (Figure 2, Item 2) and

locknuts (Figure 2, Item 1).

NOTE

Wrap all male pipe threads with antiseize tape before installation.

2.

Install connector (Figure 2, Item 4) on wheel valve (Figure 2, Item 20).

3.

Install washer (Figure 2, Item 17), o-ring (Figure 2, Item 18), and connector (Figure 2, Item 19) on hub

(Figure

2,

Item

16).

4.

Install wheel valve (Figure 2, Item 20) on connector (Figure 2, Item 19).

5.

Install hose (Figure 2, Item 5) on connector (Figure 2, Item 4) and tube (Figure 2, Item 15).

6.

Install support bracket (Figure 2, Item 8) on axle flange (Figure 2, Item 14) and bracket (Figure 2, Item 3) with

two washers (Figure 2, Item 9), screws (Figure 2, Item 10), washers (Figure 2, Item 7), and nuts

(Figure

2,

Item 6).

7.

Install valve stem (Figure 2, Item 12) and cap (Figure 2, Item 11) on tank valve (Figure 2, Item 13).

TM 9-2320-272-23-3

0491

0491-4