REMOVAL - Continued
NOTE
Steps (20) through (22) apply to M931/A1/A2 and M932/A1/A2 vehicles only.
20.
Remove two nuts (Figure 6, Item 10), screws (Figure 6, Item 1), and clamps (Figure 6, Item 11) from frame
rail (Figure 6, Item 2).
21.
Disconnect harness connector (Figure 6, Item 8) from semitrailer receptacle (Figure 6, Item 6).
22.
Remove two nuts (Figure 6, Item 9), ground wires (Figure 6, Item 3 and 7), two lockwashers
(Figure 6, Item 4), and screws (Figure 6, Item 5) from semitrailer receptacle (Figure 6, Item 6).
Discard
lockwashers.
TM 9-2320-272-23-3
0359
0359-12