TM-9-2320-272-23-3

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5

SEPTEMBER 2012

TM-9-2320-272-23-3 - Page 203 of 1469

INSTALLATION

CAUTION

Use care when routing harness. Snagging may occur and forceful pulling will result in damage

to harness.

1.

Route rear wiring harness (Figure 9, Item 16) through hole (Figure 9, Item 14) in rear crossmember frame

(Figure 9, Item 8) and lay out in approximate position.

NOTE

Receptacle cover must be lifted and held open to install top two screws.

2.

Install trailer cable receptacle (Figure 9, Item 13) and receptacle cover (Figure 9, Item 12) with four screws

(Figure 9, Item 17) and locknuts (Figure 9, Item 15).

TM 9-2320-272-23-3

0359

0359-18