TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 229 of 1469
OIL FILTER INSTALLATION
NOTE
Installation of transmission oil filter is basically the same for M939, M939A1, and M939A2
series vehicles. This procedure covers M939 and M939A1 series vehicles only.
1.
Position rubber o-ring (Figure 3, Item 3) on suction tube (Figure 3, Item 4) and slide downward until o-ring
contacts suction tube lip (Figure 3, Item 7).
2.
Install suction tube (Figure 3, Item 4) in transmission oil input port (Figure 3, Item 2), pressing until o-ring
(Figure
3,
Item
3) seats on oil input port.
3.
Install oil filter assembly (Figure 3, Item 6) on suction tube (Figure 3, Item 4), pressing until oil filter assembly
intake grommet (Figure 3, Item 8) contacts suction tube lip (Figure 3, Item 9).
4.
Install oil filter assembly (Figure 3, Item 6) on transmission mounting boss (Figure 3, Item 1) with screw
(Figure
3, Item 5). Tighten screw 10 to 15
lb-ft (14 to 20 N·m).
TM 9-2320-272-23-3
0362
0362-6
Back to Top
