TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 95 of 1469
REMOVAL - Continued
NOTE
•
Left and right headlamps are removed the same.
•
Steps (11) through (13) cover the right headlamp assembly.
11.
Disconnect connectors (Figure 2, Items 13 and 14) from right headlamp (Figure 2, Item 15).
12.
Disconnect right headlamp ground connector (Figure 2, Item 16) from headlamp (Figure 2, Item 15).
13.
Remove screw (Figure 2, Item 9), washer (Figure 2, Item 10), ground wire (Figure 2, Item 11), and lockwasher
(Figure 2, Item 12) from panel (Figure 2, Item 17). Discard lockwasher.
14.
Disconnect connector (Figure 2, Item 7) from blackout lamp (Figure 2, Item 8).
NOTE
M936/A1/A2 vehicles have only eight screws and clamps to be removed in Step (15).
15.
Remove ten locknuts (Figure 2, Item 3), screws (Figure 2, Item 4), and clamps (Figure 2, Item 2) from vehicle
(Figure 2, Item 5) and cable assembly (Figure 2, Item 1). Discard locknuts.
TM 9-2320-272-23-3
0356
0356-4
Back to Top
