INSTALLATION
1.
Install access cover (Figure 2, Item 2) on firewall (Figure 2, Item 5) and cab floor (Figure 2, Item 4) with 16
screw assembled washers (Figure 2, Item 7).
2.
Apply adhesive to back side of cab floor insulation (Figure 2, Item 3), firewall insulation (Figure 2, Item 1), and
access cover insulation (Figure 2, Item 6) and press into place on access cover (Figure 2, Item 2), firewall
(Figure 2, Item 5), and cab floor (Figure 2, Item 4).
TM 9-2320-272-23-4
0567
0567-4