TM-9-2320-272-23-4
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-4 - Page 120 of 1393
FIELD MAINTENANCE
WINDSHIELD STOP BRACKET AND LATCH REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
(Volume 5, WP
0826, Table 1, Item 56)
Materials/Parts
Locknut (Volume 5, WP
0827, Table 1, Item 282)
Qty:
4
Personnel Required
(2)
Equipment Condition
Parking brake set. (TM 9-2320-272-10)
Hood raised and secured. (TM 9-2320-272-10)
REMOVAL
1.
Remove two locknuts (Figure 1, Item 7), screws (Figure 1, Item 2), and windshield latch (Figure 1, Item 8) from
hood (Figure 1, Item 1). Discard locknuts.
NOTE
Hood insulation must be pulled back to gain access to nuts and reinforcement plates.
2.
Remove two locknuts (Figure 1, Item 6), screws (Figure 1, Item 3), reinforcement plate (Figure 1, Item 5), and
windshield stop bracket (Figure 1, Item 4) from hood (Figure 1, Item 1). Discard locknuts.
4
5
6
M5125DAA
2
1
8
3
7
Figure 1.
Windshield Stop Bracket and Latch Removal.
END OF TASK
TM 9-2320-272-23-4
0566
0566-1
Back to Top
